Dehumidifying dryer with perfect safety protection and abnormal indication system2018-07-16
Dehumidifying dryers, also known as dehumidifiers, can be generally divided into two categories: household dehumidifiers and industrial dehumidifiers. They are a small member of the refrigeration and air conditioning family. Usually, the dehumidifier consists of a compressor, a heat exchanger, a fan, a water container, a casing and a controller. The working principle is: the humid air is drawn into the machine by the fan, and passes through the heat exchanger, at this time in the air. The water condenses into water droplets, which become dry air and exit the machine. This cycle reduces the humidity in the room.
The dehumidifying dryer adopts imported microwave electric board, which has more stable performance and fully automatic control system. It is easy to operate and convenient, and has perfect safety protection and abnormal indication system. Whether it is a conventional steam heating or dehumidifying drying equipment, it is conservative. The drying process used is based on the different drying stages of the real-time moisture content of the wood. The temperature and humidity of the humid air in the dehumidifying dryer are only the lower the temperature level used for dehumidifying and drying, and the method of temperature measurement is basically the same. Measure the actual temperature of the humid air in the dryer.
The filter gas screen should be cleaned up. When the ambient temperature is lower than 15 °C, the water droplets attached to the surface of the evaporator will freeze and the effect of the dehumidifier will be weakened. If the ambient temperature exceeds 40 °C, the pressure in the system will increase and the compressor will be overloaded. At this time, the overload protector The line should be cut off or the compressor motor will be damaged. Therefore, the optimum operating temperature range for dehumidifying dryers is 15°C-40°C. If the humidity in the air is less than 30%, it is too dry and uncomfortable, so the reliable humidity controller is controlled to maintain the range of 50%-60%. When using, the doors and windows are closed as much as possible to achieve dehumidification in the room. The dehumidifying and drying machine should be placed flat and should not be tilted or sloping to avoid machine malfunction or abnormal noise.