Industry News

The mold water circuit cleaning machine is specially used to solve the scale water route and other pipeline due to scale

2018-05-15
The mould waterway cleaning machine is used for the cleaning of plastic gold mould waterways, using high-pressure water, compressed air, generating jets, flushing mould waterways. Can effectively remove the scale, rust, and residue in the tube; to improve the cooling effect of the mold, improve the use of the mold, increase production, reduce product defect rate.
The
After a long time of frequent change of hot and cold water, the mold waterway will cause a large amount of rust, scale and other dirt inside the mold waterway to adhere to the inner wall of the pipe, causing the pipes to become finer and poorer in heat conduction and other problems. In severe cases, it will block the pipe. Seriously affect the use of mold effects, so that the product forming quality is unstable, more defective products, resulting in reduced production efficiency. The mold water path cleaning machine is specially used to solve the problem of pipeline thinning and heat conduction caused by scale, rust, stains, etc. in mold waterways and other pipelines.
The
Mold water cleaning machine effect:
The
The mold can be directly cleaned without disassembling the mold, which is convenient and quick, saves time and labor, and avoids many troubles caused by manual cleaning.
The
By cleaning the inside of the mold pipe, the internal structure of the mold is strongly cleaned with drugs, so that the internal pipe can be opened.
The
The regular maintenance of the mold cleans the pipe, stabilizes the molding quality, improves the production work efficiency, shortens the molding cycle, and saves energy.
The
During the use of the mold water washing machine, failures are inevitable. When a problem occurs, the cause should be carefully searched for based on different symptoms.
The
1) The electrode is not conductive
The
a) Power board power
The
b) The fuse is blown at the power switch
The
2) The cleaning effect is not obvious
The
a) Poison is not good.
The
b) Ultrasound-assisted function off
The
The above problems occur in the mold water cleaning machine, users can find the cause and troubleshoot. However, if there are serious failures such as leakage of the pump body and black mold cleaning, the cleaning machine should be sent to the professional maintenance department with complete accessories and strong technical force to avoid unnecessary economic losses.
8613817338892
  • E-mail: info@ginkoch.com